Shop Products Water Removal

Submersible Pump with 10 metre cable, coupled to 10 metre hose. 240v Single Phase 50Hz. Price includes P&P.

With this complete ready-to use Pump kit any clean or dirty wastewater can be easily drained from ponds, sumps, basements or flooded areas.
The pump is compact and lightweight, manufactured in AISI 304 stainless steel.
The motor is cooled by pumped liquid, has an effective seal system and abrasion resistant impeller.

Applications

Garden and lawn irrigation with suction from rainwater tanks.
Fountains and water features.
Emptying of sumps, pits, tanks and cleaning areas in both industrial and ecological applications.
Transfer of water from and emptying of tanks, cisterns, swimming pools, ponds & lakes.
Draining of flooded basements, pump rooms, stores and cellars.
Pumping of domestic and commercial wastewater – washing machines, showers, sinks.

Specifications

Electrical:
Thermal overload protection. Single Phase, 230v 50Hz 2 poles 1.1kW.
10 metres of power cable complete with 3-pin 13A UK plug.
Dry Motor, Class F Insulation
IP 68 Ingress Protection Rating – Totally protected against dust and protected against
long periods of immersion under pressure. Maximum immersion depth: 7 metres.
Drivelub Seal System – watertight electric motor is protected by multiple seal system:
Oil Chamber ; V-Ring and Silicon Carbide Mechanical seal (extremely resistant to wear and abrasion ); Lip Seal continuously lubricated by Drivelub system – all providing an extremely efficient barrier against infiltration.
Open impeller, delivering 145 litres/minute up to 7m head.
Minimum level of pumped liquid 25mm. Temperature of pumped liquid: up to +50ºC

Materials :
Pump body, Motor Casing, Outer Sleeve, Impeller, Shaft Extension, Suction Screen, Nuts & Bolts:
Stainless Steel AISI 304 – DIN 1.4301
Front Diffuser Plate: Stainless Steel AISI 304 – DIN 1.4301 coated with polyurethane elastomer.
Inner mechanical seal: Silicon Carbide / Silicon Carbide.
Upper lip seal, Elastomers : NBR ( Nitrile Rubber )
Handle: Stainless Steel AISI 304 – DIN 1.4301 coated with polyacetal resins.
Power cable – HO7RN-F type Neoprene.

Hose: 10 metres of 1” 25mm yellow anti-kink water hose.
Weights: 11.8k including power cable, 10.6k excluding power cable.
10 metres of hose and brass couplings attached : 5k – components suitable for manual handling where recommended procedures are followed. Shipping weight: 17 kilos.
For advice on safe manual handling and lifting of heavy items go to Guidelines, page 16 in particular.

Incorrectly installed 230v electrical water pumps and ancillary equipment used in drainage and water transfer applications may under certain circumstances create a serious electric shock risk resulting in injury or death.

This is because the risk of electric shock is higher in the presence of water.
Pitchcare strongly recommends having this unit (and valves,sprinklers, lighting and controllers if ordered ) installed by a competent electrician in accordance with manufacturers' instructions and BS 7671 – Requirements for Electrical Installations (IEE Wiring Regulations), the UK national safety standard for electrical installation work. Electricians should be members of National Council Inspection for Electrical Installation Contracting (NICEIC).

These products may be of interest