MMC-PRO : the easiest and most effective way to treat and prevent mould, algae and moss on all hard surfaces. Just dilute and apply – end of job. Delivery savings for 4 or more.

MMC-PRO is a dynamic combination anti-viral/anti-bacterial disinfectant, fungicide/algaecide and detergent. It kills mould, algae and moss in typically 2-4 days, and has a slow cleaning action in the following weeks and months.

It is suitable for use on all exterior hard surfaces (including artificial play/sports surfaces) and, depending on the nature of the surface, dilution rate applied and natural weathering, the product will generally prevent re-growth for approximately 9 months (and longer on absorbent surfaces such as timber fencing).

MMC-PRO is readily biodegradable, PH-neutral, contains no bleach or acids, and is fully HSE-approved.

Operating Conditions
Apply on dry surfaces and leave it for 3-5 hours so that the chemical can work effectively.

Application
NO PRESSURE WASHING or SCRUBBING REQUIRED.

1. Dilute in a knapsack sprayer (or even a watering can)
2. Apply - saturate the surface
3. End of job - don't brush it in or hose it off

Dilution and Coverage
1:4 with water - for normal use at 1:4, 5L MMC-PRO makes 25 litres of dilute
1:9 with water - to treat light algal growth at 1:9, 5L MMC-PRO makes 50 litres of dilute

Applied with a knapsack sprayer, the standard coverage rate should be 4-5 m2 per litre of dilute.

Moss : ensure a thorough saturation at a 1:4 dilution rate, such that the product is in contact with the moss stem structure and not just outer foliage.

To treat a standard size tennis court at the recommended dilution rate, 5 tubs of MMC Pro are required.

Key Precautions
Contact with plant life should be minimised. Limited run-off or over-spray onto grass, soil or hardy plants will not normally cause damage, and where heavier run-off or over-spray has occurred, the area should simply be flooded with fresh water.

Pets and unprotected persons should be kept off the treated surfaces until the product has first dried (typically 3-5 hours).

Below pictures demonstrate applications of MMC Pro onto various surfaces. Before and after treatment pictures displayed.