Linear aeration can reduce sports injuries by softening turf on athletic fields and arenas. Soil and thatch restriction are permanently modified by the process of cutting vertical grooves, then filling with topdressing materials such as calcined clay, compost or sand. Linear Aeration improves water infiltration and retention, turf and root growth, nutrient absorption and organic decomposition.
The one-pass design of the Earth & Turf Linear Aerator assures maximum modification of turf on athletic fields, golf courses and polo grounds. The Linear Aerator conditions an 58-inch swath of turf by cutting grooves in the turf 3 inches deep, approximately one half inch wide and 3.5 inches apart. Aggressive, reverse-spiral-mounted teeth bring both soil and topdressing material up over the rotor. The blended materials are then brushed back into the grooves by steel fingers on a filler bar, which reciprocates side to side.
The 1,035 Lb. Linear Aerator is designed to fit the Category I 3-point hitches of tractors with 35 to 45 PTO horsepower. Standard, 540 RPM power take off drives the unit's rotor at 168 RPM through a strong, 100H chain.
EARTH & TURF PRODUCTS, LLC
112 South Railroad Ave.
New Holland, PA 17557
TOLL FREE: 888 693 2638
FAX: 717 355 2879