As we enter the month of May, football pitch renovations will be at the forefront of most Groundsmen's minds. Most clubs will have nearly finished their playing season, albeit some friendly games or cup matches may remain.
You should have organised the delivery of relevant services/materials in time for these important renovations. Be prepared to shop around to get best prices; see the Pitchcare shop for a wide range of seeds, fertiliser and rootzone products.
It is important to get the work completed as soon as you can for a number of reasons. It is important to get grass growing in the bare areas before the weeds can take advantage of these ideal seeding sites. It is also very desirable to give your seedlings as long as possible to establish and become strong.
The weather during May is normally ideal for this work, with showers intermingled with sunshine.
|Early in the Month||1st - 15th May|
An early starter fertiliser can be applied now, which may typically provide for good grass recovery and help the establishment of young grass seedlings. Something like a 9-7-7 would be ideal, but should be In line with your soil analysis.
|Later in the Month||16th May - onwards|
Monitor the progress/success of your renovations and oversow any thin areas to ensure that you have the best opportunity for the grass to be strong with good coverage for the start of the next season.
A slow release fertiliser can be applied late in the month to take the grass through June and July. Lebanon Proscape 25+0+5+1%Fe 51% MESA 22.7kg is an ideal product lasting several weeks
The list of operations required for a successful spring renovation:
As well as these tasks, you will also need to think about weed control. There is however, some very careful consideration needed on this front to ensure the time of application is right, but we will go into that presently.
If the list above is taken as a sequence of events, then you won't go far wrong with your renovation, though you may need to give some further attention to goalmouth and centre spot areas, and we will also cover that later.
Weed treatments: At some stage you will need to consider where your weed killing programme fits into the picture of your pitch renovations. Selective weed killers remain persistent in the ground for a number of weeks when sprayed, and this can have an adverse effect on your seedling grasses, if not timed properly.
If you have a noticeable amount of weeds present already, then you may be better spraying immediately to eliminate the heavy competition that new grasses will get from the already established weeds. This will also ensure that your seeding operation will be going into the voids left behind by the dead weeds.
If this is the case, you will, however, need to delay the renovation programme by some 5 - 6 weeks. Always check the on-label instructions for the period that should be given between spraying and sowing for the product you are using.
Don't forget to tailor the product to the predominant weed species i.e. if the majority of weeds present are yarrow, then look for a product that specifies on the label that it provides good control of this weed.
If you have little in the way of weeds, then it may be better to get straight on with your renovations and apply a weed killer application later in the season when your grass has established and has reached the two leaf stage. Always consult the label.
Scarifying: however you achieve it, you will need to clean out the surface, removing the remnants of old divots etc. and to get rid of the build up of dead organic matter accumulated over the winter months. Thatch can build up, particularly on the wings of the pitch, away from the more intensively played areas in the centre and goalmouth areas. Before carrying out this task, you will need to reduce the height of cut. This will not only help your grass to establish better, but will help your machinery to carry out the work without struggling.
A tractor drawn rake, followed by a box mower is probably the most traditional method, and most likely within the means of most clubs and schools. You may also have use of a pick up flail mower, in which case you may find that scarifying tines can be fitted, allowing the job to be completed in one operation.
This method can be advantageous, as the scarifying tines can leave a grooved surface, ideal for ensuring oversown grass seed is buried just beneath the soil surface and in contact with the soil. Whichever method you use, you will be aiming to achieve a surface that is short and clean with a finished mown height of 13mm to 20mm that will give your grass seedlings time to grow and establish without competing too much with the existing grasses.
Koroing is an operation that is becoming popular to those that can afford it (mostly Premiership clubs fall into this bracket). Koro topping is extremely efficient at removing the top organic layer of the pitch, however you will effectively be starting again with a newly sown surface, so your seeding rates will need to be higher.
Spiking: Relieving compaction is important, and spiking as deeply as possible is required, to 250-300mm. There are several ways this can be achieved. Some clubs may have a vertidrain or Weidenmann which will carry out this work well, providing that the model is matched to the tractor size. Other aerators include an air injection system that will help to fracture compacted soils.
Remember to check the depth of existing under soil drainage or soil heating before carrying out deep spiking. Pay particular attention to your goalmouth and centre spot areas, and don't forget the off pitch areas where your linesmen and spectators stand.
Fertilising: A good pre-seeding fertiliser, typically one low in nitrogen and high in phosphorus and potash will provide the young seedling with the essential nutrients to root quickly and to resist disease. This should be worked into the surface, brushed or dragmatted in. Water in, if rain is not expected.
Seeding: Obtain a good quality rye grass seed mixture for your renovation. Fresh seed is important as old seed will not germinate as greatly or as well as new. Look at the STRI list for the range of recommended cultivars, listed by fineness of cut, resistance to disease etc. and choose a mixture with the characteristics suited to your needs and situation.
Over sow at the rate of 20 to 35g/m2. Personally, I like to keep some in reserve in case I need to over sow any thin areas later on. The important thing is to get good seed to soil contact to ensure good germination. This can be achieved in a number of ways depending on the equipment you have to hand. If you have a Quadraplay, for instance, you could start by surface spiking, over sowing and then continue to work the seed into the surface using the surface spiking unit and brush unit.
Traverse the pitch in as many different directions as possible to work the seed into the surface (Quadraplay or not, the important thing is to get as many surface holes as possible for the seed to work its way into the surface, so a sarrel roller could complete this task equally well in combination with a brush).
The roller can be lowered on the final run to firm the surface and ensure good soil to seed contact. Alternatively, the use of seed drills will help to bury the seed into the surface and at a depth where it won't be subject to drying out. This method will produce a linear seeding pattern and it is best to complete two passes or more at a slight angle to the first.
Topdressing: chosen wisely for compatibility with your current root zone is an essential ingredient to ensuring good surface levels. If you employ the services of an agronomist, then he will have advised you of the best topdressing for your situation. This may typically have been a medium to fine sand, and of a quantity of 60 to 80 tons per pitch.
If you are using a general topdressing of say 70/30, you should be aware that this could have high clay content, despite the high percentage of sand, that could give you some problems later. It would be wise to ensure you know what is being supplied.
If you cannot afford to topdress, you may consider hollow coring, recycling them by breaking them up and drag matting them back into the surface. If the construction of your pitch is a sand slit system, then topdressing regularly with compatible sand will be required to ensure that the slits do not become capped over.
There are two main functions of topdressings, the first being to cover the grass seed to ensure good soil to seed contact that will ensure good germination of an expensive resource i.e. seed, and, secondly, to restore surface levels.
Low areas in the pitch can be concentrated on. Usually, low areas, minor dips and hollows that collect water noted during the winter can be further spiked. A slightly heavier topdressing spread than the surrounding area will help to raise these areas, though be careful to ensure the topdressing is worked into the holes and into the base of the sward. The topdressing should not be thick and left covering the top of the grass, as this will only lead to a weakened sward. Repeat the operation, if necessary and check it with a straight edge.
Goalmouth and centre spot areas: At this time of year, how much grass is still around in these areas depends on a number of factors. It is a combination of the condition of the sward at the start of the season, number of games played, the conditions that they were played in and, finally, the adopted post match and winter maintenance regimes. Suffice to say that the wear can range from minimal, with some pitches sustaining little loss of grass in the goalmouth area, to an area or strip, if you like, running the whole length of the pitch, completely devoid of grass cover.
Some goalmouth areas may even have lost both grass cover and soil, where the soil has migrated out of the area. In these areas, it is important that they receive more concentrated effort to relieve compaction and to bring the surface levels back, by importing and incorporating new material compatible to your native soil.
In some instances, you may consider turfing, though this is expensive. You will need to give the turf time to establish in order to stop it getting kicked out, unless you use thick turf.
Turf treatments: Some turf treatments work well, and there are a number of them to choose from, such as organic based micronutrients, seaweed treatments, clay flocculants, amino acids and plant growth regulators such as Primo Maxx. It can sometimes be difficult to assess the benefits of such treatments, but most managers will notice if it has been effective or not. If you are unsure, then ask your supplier for a trial amount and test it for yourself. I'm sure they would be pleased to accommodate you.
Equipment cleaning/painting and Storage: Make sure that goalposts are cleaned and painted before putting them away. The peace of mind this generates is worth it. There's nothing worse than rushing at the beginning of a season to get this job done when you have a thousand and one other things to do before your first game. Check for replacement nets and spare parts; order them in so they are on hand when needed.
Useful Information for Renovations
|Campeys show pitch renovations at their best in Germany||Football Pitch / Rugby Pitch Grass Seed|
May is the month when soils can dry out quickly, particularly as we move later into the month. Make sure that your irrigation systems are functioning, as once soils become hydrophobic and dry patch sets in, it becomes very difficult to get water back into the surface. If you follow a programme of using wetting agents to ensure a uniform wetting, this will help, particularly on soils prone to dry patch.
If you are not able to irrigate, you may have to raise your height of cut to protect the grass plant, leaving more grass on to reduce stress
Useful Information for Irrigation
|Water restriction update - all seven water companies to allow drip irrigation||Travelling Sprinklers|
Dragmatting and brushing: Continue the work of brushing to keep the air circulating around the base of the plant, particularly important for removing early morning dew and controlling disease. Following a pitch renovation, suspend this operation for a period to allow for the germination of the new seedlings to take place.
Useful Information for Dragmatting / brushing
|3G or not 3G - Professional football's latest hot topic||Drag Mats|
Cutting: Continue cutting regularly 25 -37mm to ensure a good sward density. It may be sometimes helpful with newly sown grasses to lightly roll the surface before cutting to ensure that the weakly held grasses in the surface do not get pulled out. Also ensure that any cutting equipment used is keenly set to cut without tearing.
Spiking: Continue spiking when the conditions are right to augment your deep spiking carried out to alleviate built up compaction. Keep your spiking regime flexible, alternating between surface spiking, slitting and deep spiking.
Machinery :- Keep machinery clean and well serviced after use
Materials:- Keep and record material usage, do not forget to keep your work diary up to date and record all activities and applications of products.