At last we have had a break in the weather, with some much needed rain coming in after a prolonged spell of hot weather seen in most parts of the country. This hot spell will have affected many clubs, turning fairways and the rough a golden brown colour; most greens should have avoided this problem, as most golf courses have pop up watering systems on greens and tees.

However, there are some clubs who still have to water by hand. It is important to replace any lost water; on a hot day you can lose as much as 6mm of water via evaportranspiration. The best time to water is in the evening when temperatures are cooler.

The recent wet weather may have exacerbated some outbreaks of Red thread disease, which shows itself when the turf is under nourished. Red thread has been seen on most grass sports surfaces. Conditions have been ideal for this disease. Grass plants are under stress, favourable temperatures for incubation, overcast and so much moisture in the ground enables the disease to spread quickly.A timely application of summer fertiliser to replace any leached out nutrient should eradicate the disease.

The warm moist conditions may have also increased the incidence of other fine turf diseases, such as Fusarium.

If disease outbreaks are severe, then treatment is likely to be necessary. Choice of a curative or eradicant fungicide, preferably with a systemic action, is most suitable. Protectant types can take time to work and seem less effective on aggressive disease strains. This must be a last resort, as the costs of annual applications of fungicides to large areas are very high and may eventually lead to pathogen resistance.

Control should be a mixture of good sward management, good observation and use of cultural controls. Occasionally, the bottle (or box) needs to be reached for to keep sanity and the sward alive.

Your maintenance regime will continue in much the same vein as last month's - grass cutting, grooming, brushing, aerating, feeding and watering, along with the ongoing bunker raking, hole changing and getting the course to look its best for competitions and society golfing days.

Maintain the greens at their summer height (3mm to 6mm). Other tasks that complement this work involve the use of grooming and verticutting units to remove unwanted thatch and side shoot growths. The frequency of grooming is fortnightly and verticutting monthly.

Key Tasks for August
GregEvans Aeration

Aeration practices are generally restricted to greens only, as the other areas are often too dry to get adequate penetration. Generally, from May through to September, any aeration completed on greens is done with micro tines only, so as not to disturb the playing surfaces.

Useful Information for Aeration

Articles Products
Colin Irvine - The Golfers' Course Manager Golf Course Grass Seed
5th Green[1] golf course

Fertiliser treatment and turf tonic can be continued in accordance with your annual programme. If you haven't got a fertiliser programme, have your soil tested; try an independent soil analysis company for an impartial set of results.

Most greenstaff will be applying their summer fertilisers to maintain vigour and colour, aiming to cut back on the (N) nitrogen input and (P) phosphate elements, and apply something like a 8:0:6 or similar. USGA sand based greens tend to be more hungry for fertilisers compared to the pushed up soil greens.

Most course managers are then looking to colour up the greens with an application of iron and seaweed products prior to competitions and tournaments. Many like to use straight compound fertilisers that act instantly to the conditions, rather than use slow release products that can initiate or stimulate growth when you don't want it.

In recent years, we have seen a move to using combinations of both granular and liquid feeds, applying some base slow release fertilisers that are topped up with regular applications of liquids every 2-3 weeks to maintain vigour and colour.

Also, we have seen a trend towards using a number of organic products and bio stimulants to improve sward quality and help reduce plant stresses.

Useful Information for Fertiliser

Articles Products
Maintaining a Course the Greg Evans Way Fine Turf Fertilisers
Greens mowing clipping removal

Frequencies varying from daily to twice weekly operations dependent on the growth of the grass and the standards set by the Course Manager. Mowing heights may vary depending on local conditions, type of course, course expectations, sward type and mower type.

The mowing heights are a guide, and will be subject to local weather conditions, but remember not to remove more than 1/3 of total grass height in each cut. The less stress that is placed on the grass at this vital time the better the results.

Greens. Mowing height should be maintained at around 3-6mm.
Tees. Mowing height should be maintained at around 10-15mm.
Fairways. Mowing height should be maintained at around 15-25mm.

Rough and semi rough grass areas. Mow and tidy up these areas. Reduce build up of clippings by cutting little and often with a rotary or flail. The rough will be bursting with natural flora and fauna at present. Next year, why not add some more native flower species to the rough, there are many on the market produced by national grass seed breeders.

Useful Information for Mowing

Articles Products
Adding a splash of colour to golf courses Golf Flags
Grooming / Verticutting / Scarifying / Topdressing
BLEC\'s new GKB Sandfiller in action at Crow Wood Golf Club, Muirhead, Scotland, watched by groundmen and greenkeepers

Many clubs are now moving towards little and often regimes of grooming and verticutting, looking to carry out these tasks on a fortnightly basis, keeping unwanted and straggly grass groomed and upright ready for mowing.

Topdressing is now done more frequently, with a number of golf courses applying light dressings on a monthly basis.

Changing of holes should be carried out regularly, however frequency will be dependent on a number of factors, green size, greens construction, tournaments, amount of play and condition of the green. During wet periods it is likely the hole will wear more quickly, resulting in a crowning affect and surface wear.

This wear is more apparent if the green has thatch problems. The hole will tend to wear quickly and form a depression caused by the placement of the golfers' feet. You may be looking to change the hole positions more than three times per week during wet periods. Most golf courses are changing their hole positions at least three times a week.

Keep an eye on fungal disease attack, and use approved fungicides to treat infected areas. Scarring of the playing surface is normally reduced as grass growth is usually dominant and vigorous, reducing the need to use fungicide treatments.

However, there may be a need to apply a preventative fungicide treatment in the event of important competitions or matches, thus reducing the damage or effects of any disease. Red thread is widespread now, especially on red fescue and ryegrass, so if you have signs of this, a feed of nitrogen will be effective.

Useful Information for Grooming / Verticutting / Scarifying / Topdressing

Articles Products
Basic principles of top dressing Top Dressing
Other Tasks for the Month
  • Check and repair fences, seating, shelters, bridges, litter bins, shoe and ball cleaners, signs, and tee boxes.

  • Check and rake bunkers daily.

  • All tee boxes, tee pegs and competition markers should be inspected daily, cleaned and moved to new positions as required.

  • Inspect and clean machinery after use, service and repair damaged machinery.

  • Inspect all water features on course, cleaning out any unwanted debris and litter.

  • Mark out trolley areas, out of bound site areas and range markings.

  • Keep all footpaths clean and free from debris, check any step details and hand rails (Health & Safety).

  • Repair any divots and scars. Divotting in dry weather is very important as there is little time to waste, and that divot needs to knit back into place. Replace it, add a dressing of root zone, seed and then irrigate.

  • Over seeding of sparse or bare areas can be continued, the rise in temperature will help germination. Use germination sheets to aid this process but remove the sheets regularly to check for diseases. Remember that without good seed to soil contact the operation is useless.