Key Tasks for November
At this time of the year, most course managers and greenkeepers will be looking to increase mowing heights on greens and tees by 1-2mm.
Other tasks that complement this work involve the use of grooming and verticutting units to remove unwanted thatch and side shoot growth. The frequency of grooming is fortnightly and verticutting monthly.
Mowing frequencies will vary from daily to twice weekly operations, dependant on the growth of the grass and the standards set by the course manager. Mowing heights may vary depending on local conditions, type of course, course expectations, sward type and mower type. The mowing heights are a guide, and will be subject to local weather conditions, but remember not to remove more than 1/3 of total grass height in each cut. The less stress that is placed on the grass at this vital time, the better the results further on into the season.
- Greens- Mowing height should be maintained at around 4-6mm.
- Tees- Mowing height should be maintained at around 10-15mm.
- Banks- Mowing height should be maintained at 22-30mm
- Fairways- Mowing height should be maintained at around 15-25mm.
- Rough, Semi rough grass areas- Mow and tidy up these areas. Reduce build up of clippings by cutting little and often with a rotary or flail. Mowing height will depend on type of course and the standard of play required. Mowing height of cut during the winter between 50-100mm.
Fertiliser programmes are not generally carried out after November due to the change in air and soil temperatures, as most turf grasses usually start to become dormant, slower growing.
Overseeding of sparse or bare areas can be continued in November, particularly when using rye grasses. Use germination sheets to aid this process but remove the sheets regularly to check for diseases.
Aeration is the key to keeping the golf course open throughout the winter periods, especially on heavy soil courses. Various aeration programmes will continue when conditions allow, using a whole range of tines, solid, slit and hollow tines. A wide range of solid or slit aerators are put to use on the greens. It is essential to keep the greens aerated to maintain air and gas exchange in the soil profile, thus improving the drainage capabilities of the greens.
Aeration of tees will continue throughout the winter when weather conditions allow.
When the ground conditions are favourable, aerate fairways with solid tines to increase air and gas exchanges in the soil profile. Encouraging deeper rooting of fairway grasses is important. Deeper rooted grasses are more likely to overcome stresses in the following year.
Inspect, weed and rake bunkers. Repair any damage from rabbits or other animals, maintain sand up the face of the bunkers to prevent erosion and sand loss. Bunker construction works may start in November to make use of the good ground conditions for transporting materials around.
Changing of holes should be carried out regularly. You may be looking to change the hole positions more than three time per week during wet periods.
The works are generally centred on drainage work, bunkers / tees refurbishments, ditch clearance, pathway construction and tree work.
A generally mild October with good growing conditions has provided opportunity for continued recovery across many areas of the country, especially in the north and west of the British isles. Speaking to turf managers across the south and east, comparably lower rainfall in some areas has resulted in stalled recovery from summer drought stress. Maximising any rainfall via the use of penetrant wetting agents and aeration will assist the rehydration process; something which needs to be encouraged before cold temperatures eliminate opportunities for growth.
With that in mind, the forecast for November is for periods of stormy and wet weather interspersed with drier spells and crucially, with respects to turf management, below average temperatures.
As always then, prior preparation with a mindset to wards proactively making use of favourable windows are key considerations.
TURF DISEASE TRIANGLE
Disease incidence can be correlated with the factors in the disease triangle. All three factors are required to coincide for an outbreak of disease. The major pathogen on turf surfaces throughout November will be Microdochium nivale.
Consideration of the contributing factors
- Susceptible host – excess leaf growth and stress will lead to the grass plant (host) becoming more susceptible to fungal pathogens. The key phrase here is appropriate nutrition. In practice this means the Goldilocks zone of nitrogen, just enough to keep the plant healthy but not too much to cause a flush of soft growth which allows the disease to attack more successfully.
Providing the plant with calcium, silicon and phosphite strengthens the cell walls and helps the plant to resist attack without resorting to chemicals. Applying plant beneficial biostimulants such as seaweed and carbon energy when conditions favour the plant primes its metabolic defence responses and assist’s beneficial microorganism’s to help repel the disease.
- Virulent pathogen – Is the pathogen being provided with the resources it needs to thrive? In the case of fungal pathogens this would be prolonged periods of leaf blade wetness and nutrition. Manage this situation by removing dews, reducing humidity within the thatch layer via aeration and the application of penetrant wetting agents. Also avoid applying biostimulants such as seaweed and carbon energy at times when the pathogenic activity is actively on the rise.
- Favourable Environment – prolonged humidity as a result of overcast days and nights, rainfall, cool temperatures which slow grass growth and low wind speeds which extend drying times are the factors which when they align drive the arms race between host and pathogen away from the grass plant and towards the disease. Monitoring forecasts and historic patterns facilitates prediction of high disease pressure. Allowing turf managers to act appropriately.
Nutritional requirements will be aligned with growth, put simply the more growth the more nutrition required. Typically fertilisers applied during renovation operations should see the majority of surfaces through November and into December. As a result NPK applications will be limited however, targeted application of secondary macronutrients and micronutrients to elicit plant responses such as those outlined above with calcium will bring tangible benefits.
Maintaining appropriate water air ration is a key factor in reducing turf stress during periods of the year where rainfall increases and drying opportunities are reduced. Little and often aeration via methods such as star tineing and sarel rolling facilitate diffusion of oxygen into the profile and carbon dioxide out. This allows the plant roots and beneficial soil microorganisms to breath which reduces plant stress and sustains their population numbers respectively.
Maintaining water percolation into deeper aeration channels and drainage systems via the application of penetrant wetting agents reduces the tendency of water to be held at the surface where it acts as a barrier to gas exchange and increases localised relative humidity. Something which helps fungal diseases to grow and spread.
Regular applications of products containing sulphur will acidify the local soil surface environment and discourage worms from casting. Avoid regular products containing iron which is not in a liquid chelated form as this will quickly oxidize and build up in the soil chemistry causing numerous problems such as reduced pH, iron panning, nutrient lock up and inhibition of microorganisms.
It is important to maintain machines by carrying out regular servicing and repairs.
As grass growth slows down, use the time to take some machines out of operation for an overhaul.
- Inspect and clean machinery after use.
- Maintain a stock of consumables for your machinery, replace worn and damaged parts as necessary.
- Secure machinery nightly with good storage facilities and strong locks
- Record makes and models and take pictures of your equipment as additional referencebetter still, take pictures of your equipment.
Pitchcare provide a range of courses suitable for golf courses. In most cases, the courses can be held on site using the club's own equipment and machinery.
Some of the other courses available are:
Chainsaws - CS30 and CS31
H&S Refresher Training on Combined Turf Care Equipment; Tractors and Trailers; All Mowers (Ride-on and Pedestrian)
Machinery Courses on ATVs; Tractors: Brushcutters/Strimmers; Mowers (ride-on and Pedestrian)
Pesticide Application (PA courses)
Stem Injection of Invasive Species (Japanese Knotweed etc.)
Basic Trees Survey and Inspection