The recent mild weather has resulted in higher than average air temperatures for the time of the year, well into double figures which, in turn, has encouraged some early spring growth.
These soil and air temperatures should become more consistent, once we get a few hours of bright March sunshine. Surfaces will, hopefully, dry out, allowing you the opportunity to get on with your planned spring work.
The present condition of the courts will also have a bearing on what maintenance operations you should be doing. Coming out of this unseasonal wet and mild winter weather, there will be many clubs suffering from a build up of moss and algae problems.
Carrying out some relevant spring renovation work certainly helps the grass to recover, and help stimulate the performance of your soil profile.
Usually this involves a combination of several tasks such as aerating the soil profile, some light scarification work, overseeding and applying a dose of fertiliser to stimulate some grass growth.
Emphasis will then be focused on getting your mowing programme up to speed, ensure your mowers are set up correctly, serviced and blades sharp.
A number of Groundsmen are now using pedestrian rotary mowers for their initial cuts and then reverting to using their cylinder mowers that produce a finer cut. Other benefits of using a rotary mower is that it hoovers up any debris and helps the grass stand up.
Key Tasks for March
With soil temperatures warming up, it is important to get some spring fertiliser on to stimulate some early growth and improve colour. Also remember to brush or dragmat the courts to remove early morning dew, thus helping to reduce the incidence of disease
An application of iron sulphate will help kill off any moss; it will usually take a couple of weeks to die, this will enable you to remove the moss during your spring renovation programme.
Ideally, you should conduct a soil analysis to confirm the nutrient status of your soil, and buy an appropriate fertiliser product to suit your requirements.
Get yourself prepared for your spring renovations, which tend to take place towards the back end of March/early April when grass growth is more consistent to aid recovery.
Undertake some aeration work to help get air back into the soil profile.
Mowing frequencies will gradually be more frequent as the grass begins to grow, going from a weekly cut into a 2-3 cuts per week in April. This increased mowing regime helps stimulate the grass plant and help thicken up the sward.
The sward should be maintained at its winter height of cut between 12-18mm. The use of a rotary mower can be ideal for topping off and, at the same time, cleaning up any surface debris.
Usually, these renovation revolve around some light scarification work, which helps remove any dead moss and unwanted thatch, aeration, topdressing and overseeding. Consult the new Grass Seed 2015 booklet to choose appropriate seed cultivars.
A dose of slow release fertiliser can be applied to act as a base feed; this will keep the grass plant fed for a couple of months, which can be supplemented with some liquid feeds as and when required.
If grass shows signs of stress (weak growth, discoloured), fertiliser treatment and turf tonic can be continued in accordance with your annual programme. If you haven't got a fertiliser programme, have your soil tested; try an independent soil analysis company for an impartial set of results. Apply a spring fertiliser when conditions allow.
Moss is generally the main problem at this time of year. Mosses are primitive non-flowering plants that have no root structure and rely on there being sufficient moisture in the environment for reproduction and survival. The majority of mosses are tolerant of acidic conditions and are stimulated by wet humid conditions. Rapid colonisation of moss and algaes usually occur during autumn and winter months when turf surfaces are lying wet and saturated for long periods of time, particularly when little or no aeration has been undertaken.
Remember, moss is the symptom of poor grass growth, and not the cause of it. If you make sure you have a tightly knit sward next year, and have maximised drainage with plenty of regular aeration, you should not have to deal with moss at all.
If you are saddled with a turf situation that has a lot of moss present, there will be a requirement to kill it off. The only product now available to control moss in turf is sulphate of iron (Ferrous Sulphate), it is relatively cheap and effective. It can be applied in a liquid or granular formulation. The granular form is usually mixed with sand to provide a carrier for the active ingredient. Apply at recommended rates.
When using lawn sands, it is important you use a compatible sand product that matches your rootzone soil profile. You do not want to create a layering problem. Some club Groundsmen may not entertain the use of lawn sand, as they do not want to introduce a sand medium into the clay based soil structure.
For tennis courts, I would recommend you apply the sulphate of iron in a liquid form; you will have better control over application rates.
For best results:-
• Apply when the turf is actively growing and the soil is moist
• Mow 3 days before treatment and do not mow for three days after treatment
• Water after 2 days if no rain forecast
• Rake out dead moss thoroughly 7-14 days after treatment
• Re-treatment may be necessary for heavy infestations
Any bare or sparse areas can be lightly tilthed, overseeded and topdressed with a sand/soil rootzone
Daily brushing will help disperse early morning dews and help dry out the sward, thus reducing the amount of surface leaf moisture content that can initiate an outbreak of fungal disease. Brushing also helps stand the sward upright and increase air flow around the grass plant.
It is also important to try and keep the the top 50mm of the soil profile free draining, this is achieved by keeping the surface open to allow gaseous exchange, thus preventing anaerobic conditions prevailing. The surface is kept open by a programme of aeration techniques, varying the type and size of tines used.
With regard to aeration practices, any deep aeration of the courts should have been completed in January, so as not to incur problems later in the year. Deep aeration carried out in late March can lead to the tine holes/slits remaining in the soil profile well into the playing season, which can cause some surface deterioration when the clay soils begin to dry out.
Sarrel rollers can still be used to keep the top 20-45mm open to aid surface water drainage.
There may still be some bare or thin sward areas; these can be oversown when weather conditions improve; the use of germination sheets will greatly improve success rates.
Inspect and remove debris from playing surface - litter or any wind blown tree debris, twigs and leaves. Leaf debris can be a problem during the winter months. It is important to sweep and clear the leaves off the courts as an accumulation of wet leaves will damage the grass surface.
Artifical surfaces: Artificial tennis surfaces also need attention. Regular brushing is essential to keep them clean and free from contaminations. Sand filled/dressed carpet systems also require regular brushing to keep them clean and to redistribute sand infill materials.
American Fast Dry courts: Keep surface clean, rolling to consolidate surface, levelling and brushing of fast dry materials, brushing to clean lines.
Tarmac Courts: February is a good time to clean your tarmacadam playing surfaces. Ideally, it pays to power wash the courts surface to remove any debris, moss and algae that will have accumulated and deposited itself on the courts during the winter months. Be careful when washing, using a too powerful washer can result in surface damage.
Keep surfaces clean, regular sweeping and brushing. Repair any hollows or damaged areas. Repaint lines.
Moss and algae can be a serious problem on tarmac tennis courts, especially if the courts are situated next to trees and hedges, the shading and damp conditions create a favourable environment for moss and algae to grow. Regular brushing and cleaning of the courts helps disturb the moss preventing it from taking hold. However, once established, the best methods of control are by a combination of chemical and washing activities.
Clay courts: Keep surface clean, regular sweeping and brushing to restore playing levels using SISIS Trulute or similar equipment. Topdress any hollows or damaged areas. Repaint lines.
Algae can often be a problem at this time of the year on artificial playing surfaces. Regular brushing and fungicide treatments may be required to reduce and remove algae growth on the courts. You should use approved chemical products when treating algae problems.
March is a good time to take soil samples and get them sent off for analysis, enabling you to get them back in time to start your new season's maintenance. Ideally, if you have not had one done before, you should have a full (PSD) Particle Size Distribution soil analysis done to tell you the actual make up of your soil profile.
Soil is made up of percentages of clay, silt and sand. The PSD analysis will identify the ratio of these and confirm soil type, thus giving you a better understanding of what soil you are dealing with.
Also, you can establish the amount of organic matter (OM) content, as well as soil nutrient status and soil pH. With this information, you will be able to identify the needs of your soil.
Carrying out these test also allows you to check other physical conditions of the green, such as root depth, levels of compaction and aerobic state of the soil.
Some clubs continue to apply wetting agents to help improve and enhance soil performance. A wetting agent is such a substance that reduces the surface tension of a liquid, causing the liquid to spread across or penetrate the soil profile more easily. These are usually applied on a monthly basis.
To maintain optimum growing conditions for the grass plant a planned fertiliser programme should be implemented. Ideally, a soil analysis should have been carried out to ascertain the nutrient status of your soil. Once known, an effective NPK fertiliser programme can be applied to maximise plant growth.
Fertilisers now come in many forms, both granular and liquid. It is important that you understand how these products work and how to apply them. If in doubt leave it to a professional company to do it for you. Many greens are damaged and affected by poor fertiliser applications, using the wrong product or over or under dosing. This often leads to visual and physical problems on the surface.
Weeds should not be too much of a problem if you carried out a sucessful selective weed programme last year.
Keep and eye open for fungal disease, and use approved fungicides to treat any infected areas. Early morning dew on playing surfaces often promotes the chance of a disease attack; regular brushing off the dew will help prevent this.
Red thread is an extremely common turfgrass disease that can develop at any time of the year during cool, wet weather, but frequently appears most severely during late spring and autumn. It can develop on most turfgrasses, but ryegrasses, meadowgrasses and fescues appear to be more commonly affected. This disease is often referred to as an indicator of low fertility, and symptoms will often develop more severely if nitrogen or potassium is limited.
Usually, a dose of fertiliser will help control and outbreak of Red thread, howerver, it it persists, many of the fungicides that are currently available for use on managed amenity turf have shown efficacy against this turf disease and, where necessary, can be used as part of an integrated programme. Always ensure that the disease is correctly identified prior to the application of any plant protection product.
You, should have had your mower serviced and sharpened ready for the new season; it is well worth the money investing in a winter service.
Keep machines overhauled and clean.
Please take time to inspect and repair any watering or irrigation systems; many bowling clubs now have pop-up irrigation systems. Organise an inspection, re-commissioning and calibration of your irrigation system.
You should also be checking and servicing your floodlighting systems, ensuring they are ready for the new playing season.
It also important to replace any worn tines on your aeration equipment.
Also, March is a good time to clean out the shed, sell off any old machinery and dispose of any junk that's clogging up the shed.
Pitchcare provide a range of courses suitable for tennis clubs. In most cases, the courses can be held on site using the club's own equipment and machinery.
Some of the courses available are:
Chainsaws - CS30 and CS31
H&S Refresher Training on Combined Turf Care Equipment; Tractors and Trailers; All Mowers (Ride-on and Pedestrian)
Machinery Courses on ATVs; Tractors: Brushcutters/Strimmers; Mowers (ride-on and Pedestrian)
Pesticide Application (PA courses)
Stem Injection of Invasive Species (Japanese Knotweed etc.)
Basic Trees Survey and Inspection
Drainage: Inspect drainage outfalls, channels and ditches. Ensure that they are working. Renew or repair any damaged or problematic drainage systems.
Tennis structures: Inspect stored posts, nets, seating and notice/score boards. Replace with new equipment if required. Repair any damaged fencing.
Litter: Inspect and remove debris from playing surface - litter or any wind blown tree debris, twigs and leaves. Leaf debris can be a problem during the winter months. It is important to sweep and clear the leaves off the courts as an accumulation of wet leaves will damage the grass surface.