JCB is building on its long pedigree of manufacturing wheeled loaders with the introduction of a brand new flagship machine which offers more power, torque and productivity.
The company - which has been making wheeled loaders for 44 years - is introducing the new JCB 457 at Intermat 2012 to replace the existing 456. At the heart of the machine is a Stage IIIB (Tier 4 Interim) compliant 8.9 litre Cummins engine - the biggest engine used in JCB's construction equipment range.
The engine incorporates the following technology:
- A high-pressure common rail fuel injection system,
- exhaust gas recirculation
- a diesel oxidation catalyst, plus a diesel particulate filter and
- a variable geometry turbocharger, which delivers an improved machine response at low rpm.
The JCB 457 delivers excellent power, with 186kW or 250hp - up 16% on the outgoing model. It has 1,085Nm of torque, an increase of 18% on the 456. And it doesn't require any supplementary additives to provide high power outputs with low emissions. DPF service intervals are every 5,000 hours in Europe, or 4,500 hours in North America.
A new Economy mode, to reduce engine output for lighter duties, means the 457 can deliver
fuel savings of up to 6%. It also has a low idle feature and an engine shutdown mode, which kicks in after a pre-determined idle period to save fuel.
A four-speed automatic power shift transmission comes as standard and a five-speed power shift transmission is also available, which certainly delivers a better driving performance and acceleration because of the smaller steps between gears.
The lock-up torque converter on the five-speed transmission activates in gears 2 - 5, reducing losses from the transmission and increasing productivity and means customers will really notice the difference on hill climbing, roading and load and carrying performance.
An intelligent clutch cut-off system also comes as standard, for both the 4-speed and 5-speed transmissions, making it ideal for truck loading or tight corner manoeuvres. The system dynamically adjusts the clutch cut-off point depending on transmission output torque and brake pressure. It effectively disengages the clutch to limit tractive effort, and also reduces brake wear within the new ZF axles.
When the operator presses the brake pedal, maximum power is provided to the load sensing hydraulic system, while reducing power to the driveline. This provides much greater control at higher engine rpm and lower travel speeds, boosting productivity when digging and loading.
The new ZF automatic differential lock axle option means that customers can choose:
• Standard open differential
• Limited slip differential, or
• An automatic differential lock on the front axle only
This automatic option locks the differential when required - without the operator needing to activate the system, providing increased traction and less slippage, not only reducing wheel spin and tyre wear, but improving fuel consumption and boosting productivity.
The JCB 457 also offers more loading capability, weighing 310 kilos more than the 456. The tipping load is increased by 3.3%, which means that an extra quarter of a tonne can be carried in the bucket.
Other improvements include:
• The ability to adjust the JCB Smooth Ride System so it can be activated at any speed, allowing operators to tailor it to individual site requirements.
• Relocation of the hydraulic tank from beneath the cab steps to behind the cab, reducing the potential for damage or contamination.
In terms of styling and design, the distinctive large cab is home to a much-improved interior. A new full-colour LCD monitor and a revised instrument cluster, providing the operator with a clear view of important machine functions. The menu system is intuitive and provides the operator with real time fuel consumption and cycle data.
The JCB 457 is available with a choice of conventional multi-lever layout, a single joystick with separate auxiliary control lever and a joystick with proportional control auxiliary controls built in.
New rear styling with a revised counterweight design, gives the 457 a more modern and aggressive look and the sloping engine canopy at the rear, has been designed to also improve all-round visibility.
JCB Chief Innovation and Growth Officer Tim Burnhope said: "This restyling certainly differentiates the 457 from the previous generation of JCB wheeled loaders and sets a new design direction. The JCB 457 is a bigger, better and frankly, unbeatable new wheeled loader from JCB."
For further information contact: Nigel Chell JCB Press Office
Tel: 01889 590312 Fax: 01889593455 E-mail: firstname.lastname@example.org www.jcb.com