SISIS will be exhibiting at FSB Cologne, Germany from 5-8 November 2019 where the British manufacturer will be showcasing a range of market leading turf maintenance equipment for synthetic surfaces.
Visitors to the exhibition will able to locate SISIS in hall 10.2, Aisle A, Stand No. 038, and will have the opportunity to see the following products:
The SISIS Brush-Pro is a ride-on brushing system comprising a pair of mid mounted oscillating units and three rear mounted brush units that that have been specifically designed for maintaining synthetic surfaces. The machine has been designed for maximum manoeuvrability and operator comfort which features an electric start, hydrostatic drive for forward/reverse and its brush combinations - oscillating for thorough periodic work and rear mounted brushes for more routine work.
SISIS Osca 3
The SISIS Osca 3 is a tractor mounted powered oscillating brush with a 1.9 meter working width and is equally effective when used on synthetic turf with sand or rubber infill. The two oscillating brushes stand the carpet fibres up and redistributes the infill evenly, minimising compaction on the surface and improving its performance - giving consistent playing characteristics while preventing pile damage caused by reduced infill levels.
A contributory factor to the reduction of compaction is that the Osca's working width will use fewer passes than other more conventional drag brushes to complete a pitch. Its aggressive brushing action agitates the upper infill level of the surface from side to side as well as brushing forward, helping reduce surface compaction and encourage the fibres to stand up straight which reduces the risk of contamination, drainage problems and leaves a consistent playing surface across the whole pitch.
SISIS Twinplay with Flexicomb and straight brush
The SISIS team will also be showcasing the Twinplay Towed Implement Frame (TIF) and the Flexicomb and straight brush. The Twinplay frame is a single pass maintenance system which accepts two implements at any one time and the Flexicomb and straight finishing brush is recommended for both sand and rubber infill surfaces. The Flexicomb ensures even distribution of infill and lifts the carpet pile while the straight brush produces a smooth level and eye-catching presentation. For rubber crumb surfaces a more aggressive brushing is required and this can be achieved by adjusting the crossbar on the Flexicomb to stiffen the bristles.
As well as the products being on show, the experienced SISIS team will be on hand to advise on maintenance procedures and offer tips on how to prolong the life of synthetic playing surfaces.
For further information or a no obligation demonstration, please contact SISIS on 01332 824 777 or visit www.sisis.com