The Garden Sprinkler Kit is perfect for home and garden enthusiasts to keep lawns hydrated and healthy during spring/summer months. The 8 m circular watering pattern is perfect for domestic gardens and ornamental lawns as it offers an even and consistent water coverage. The Residential Sprinkler can be operated off low water pressure and have both a geka and hoselock attachments included.
The Garden Sprinkler Kit contains 1 x sled base, 1 x brass quick coupling, 1 x galvanised adaptor, 1 x riser pipe, 1 x Rotoframe Sprinkler, and 1 x PTFE roll to seal threaded joins.
|1) Screw the Brass quick coupling into the inlet.Wrapping PTFE tape around the thread first.|
|2) Screw the galvanised bush into the plate of the sled base,using PTFE tape.|
|3) Screw the riser pipe into the bush, using PTFE tape.Making sure all threaded are securely and tightly.|
|4) Screw the sprinkler head into the top. DO NOT use PTFE tape as this may affect the operation of the sprinkler head, do not use grease or oil of any kind.|
If your sprinkler head does not flick back when sectoring this usually denotes a pressure problem on site. Please check that the nozzle does not have any dirt lodged in it, and that the sprinkler head is moving freely. In some areas watering outside of “peak“ water usage times may help improve performance if you have poor or fluctuating pressure.
For further information on our Garden Sprinkler Kits, please contact a member of our technical sales team on +44 (0)1902 440250.