Heavy Duty Aluminium Hockey Goals

Heavy Duty Aluminium Hockey Goals

All hockey goals must be anchored correctly to conform to BS EN 750. On synthetic surfaces, suitable provision for anchorage must be made. This can be achieved by installing a ground anchor below the synthetic grass level or by attaching the goal to the nearest perimeter fixing point. If freestanding weights are the only option then 10 x ANC-005 Counterbalance weights are required per goal. See below for anchoring options.

Features

• Manufactured from 50.8 mm x 65 mm x 2.5 mm thick reinforced aluminium
• Uprights, crossbar and side frames all polyester powder coated white
• Zinc plated corner joints made from 8 mm thick steel plate
• Back supports and top backbar manufactured from 32 mm diameter x 2.6 mm thick aluminium
• 460 mm high reinforced aluminium backboard panels with green noise-absorbing carpet on all inside faces
• Side frames complete with fully welded back tubes and lifting handles for added strength
• Stainless steel bolts throughout
• Uprights and crossbars feature stainless steel retaining rods to ensure net is held firmly in position
• If freestanding weights are the only option then 10 x ANC-005 Counterbalance Weights are required per goal.
• Dimensions: Regulation size: 3.66 m wide x 2.14 m high with a 1.22 m runback
• Weight: 190.00 kg per set

Please Note: All goals come as a set of 2. (Nets and other accessories need to be bought separately)

Recommended Extras

Nets: HP14 Hockey Goal Nets

Wheels: Cellular Rubber Wheel

If you require any further information regarding the Heavy Duty Aluminium Hockey Goals, contact our technical sales team on +44 (0)1902 440250.