Plifix synthetic grass implants are a safe and permanent ground marking system. They are the most practical solution for marking buried objects or setting lines and boundaries.
The tough fibres are UV stabilised to prevent fading and come in a range of 3 colours white, blue and yellow. Once screwed into place the grass tufts remain in situ during mowing, fertilizing and any other ground care that is required.
The Plifix technology is protected by patent and used by professional landscapers, greenkeepers, groundsman and gardeners worldwide.
The product is present in more than 200,000 sports grounds in Europe and they are used to mark out playing fields, ensure the exactness of dimensions and facilitate the marking of lines.
|Step 1: Choose a location, then manually push the Plifix screw 2cm into the ground. This makes it easier to adjust the alignment of several Plifix along the same line. On clay surfaces turn the Plifix upside down and balance it on the fibres.|
|Step 2: Place the driving tool onto the screw ensuring the fibres are inside the tube.|
|Step 3: Hit with a hammer until the dotted ‘‘STOP’’ line, then remove the driving tool. The top of the screw must be 3cm beneath the level of the ground, so that the fibres are 3 to 4cm above the hole. Stabilised surfaces and clay: first of all make a hole using a small chisel.|
|Step 4: Pour sand between the fibres to fill in the hole between the top of the screw and the ground. Sand increases the resistance of Plifix against uprooting and gives the fibres a natural appearance. Finish: gently hit the Plifix with the flat part of a hammer to give it a more natural appearance.|
Important: The product includes the driving tool for installation and a complete set of instructions.
If you require any further information regarding the PLiFix Grass Tufts, contact our technical sales team on 01902 440250.