Description
Linear Aerosol Line Marker Applicator
The applicator sprays a 50 mm (2 inch) wide line and can be used as a two wheel aerosol applicator for spraying lines involving tight curves and free hand line marking or as a four wheel aerosol applicator for spraying straight lines by attaching the rear wheels.
The rear wheels are attached by securing the rear wheel adaptor to the handle by use of the two bolts supplied.
The aerosol is located into the applicator by moving the securing bracket around to the left or right and dropping the aerosol through the securing ring.
Directions For Use
- Direct the nozzle so that it drops into the hole in the spray plate.
- If you are using Sports Line aerosols, ensure that the directional groove on the aerosol nozzle is placed horizontally, i.e. across the line of spray.
- Next slide the securing bracket over the rim of the top of the aerosol can and hook it in the centre.
- Apply pressure to the thumb trigger to spray the aerosol paint.
For advice or further information on the Linear Aerosol Applicator, please speak to a technical sales advisor on 01902 440280.
Delivery and Returns
Delivery charge (if applicable) applied at checkout. Next working day delivery is available on some products, as an option on orders placed before 1pm - excludes festive season & bank holidays. Please note deliveries to Highlands, Cornwall and more remote areas may take longer. Surcharges apply for non mainland locations, call for more information - More delivery information.
For large orders, please be aware that if you require a smaller 7.5 tonne lorry, the maximum weight for pallets is 750 kg - otherwise the standard pallet size limit of 1000 kg applies.
If you have any access restrictions for lorries or large vehicles please speak to our sales team on +44 (0)1902 440250.
Collection from our Telford, Shropshire, Trade Counter is available for this product - More collections information.