Using Composts to Improve Turf Performance

Prof Peter Landschootin Best of the Rest

Using Composts to Improve Turf Performance


By Peter Landschoot, Associate Professor of Turfgrass Science, Department of Crop and Soil Sciences - Cooperative Extension.

If you have been searching for ways to improve turf performance in marginal or poor soils, consider using compost as a soil amendment. In clay soils, good quality compost will improve structure, reduce surface crusting and compaction, promote drainage, and provide nutrients. In sandy soils, compost increases water and nutrient retention, supplies nutrients, and increases microbial activity. These improvements promote faster turf establishment, improved turf density and color, increased rooting, and less need for fertilizer and irrigation.

In many cases, compost production sites are located near areas of intensive turf use, providing a readily-available and reasonably-priced source of organic matter. Depending on your location, compost may be less expensive than topsoil and peat. When considering costs, keep in mind that compost usually produces better turf than equal or greater amounts of topsoil.

Selecting a compost - some guidelines to follow

Before selecting a compost, realize that not all products are alike. Composts are made from many different sources, including household refuse (municipal solid waste), leaves and grass clippings (yard trimmings), sewage sludge (biosolids), animal manure, paper mill by-products, and food residuals, just to name a few. Compost quality varies depending on the source and how it is produced.

Because of quality differences among compost products, it is important to have some basis for determining suitability for use on turf. Ideally, the product in question has been field tested at a university and/or has been used successfully by other turf managers. Using a compost with a proven track record can take some of the guess work out of the selection process provided that the product is consistent from batch to batch.

Whether you are using a field-tested product or one that has never been used on turf, obtain a sample of the compost prior to use and examine it for undesirable objects and peculiar or offensive odors. If the producer does not have an analysis of chemical and physical properties, submit a representative sample to a laboratory that will conduct appropriate tests and provide recommendations that you can understand. Some basic guidelines for evaluating the suitability of a compost for use on turf follows.

Appearance: Although the appearance of compost will differ slightly among products, the color should resemble a dark topsoil and have a light, crumbly structure. It should be free of large stones, large pieces of wood, trash (especially glass), and other objectionable objects.

Particle size: The size of compost particles can vary depending on the method of application and how the turf is used. For use in surface applications on athletic fields or lawns, a compost should pass through a 3/8 inch screen. Composts with slightly larger particles can be used as soil amendments if thoroughly tilled into the soil prior to seeding or sodding.

Odor: A good quality compost should have an 'earthy' aroma (similar to that of a woods or forest) and should not emit peculiar or offensive odors such as those associated with ammonia or sulfur. Peculiar odors may be an indication that the compost is not mature (not fully composted). Immature composts may have adverse effects on turf and should not be used.
Figure 1. Composts should be free of objectionable objects.compost-fig1compost.jpg

Figure 1. Composts should be free of large stones, large pieces of wood, trash (especially glass), and other objectionable objects.

Weed seeds: If the product has been properly composted and stored, weed seed contamination will not be a problem. The composting process should destroy nearly all viable seeds. Occasionally, temperature control in some composting operations is not monitored adequately and some weed seeds survive. Another source of contamination is from weed plants growing on compost piles that have been stored outdoors for long periods. If these weeds are not controlled they can deposit seeds in the compost.

Although a few weed seeds do not necessarily preclude the use of a compost as a soil amendment for turf, composts containing large amounts of weed seed are unacceptable. If possible, inspect the production site to make sure that weeds are not growing in and around the compost piles.

Moisture content: The moisture content of a compost is important where uniform application and good mixing with soil is desired. Composts with moisture contents between 30 and 50% are usually ideal for handling, surface applications, and soil incorporation.

Wet composts (greater than 60% moisture content) tend to form clumps and do not spread evenly when applied on turf surfaces. Tilling wet material into soil may result in poor mixing poor establishment. Also, wet composts are heavy and difficult to handle.

Dry composts (less than 20% moisture content) are easy to handle and spread easily, but may produce excessive dust. On windy days, the dust may leave a film on windows or siding of nearby buildings. Dust may be inhaled or get into the eyes of the applicator. Dry composts that are high in organic matter content tend to 'float' on the soil surface during attempts to incorporate them. In this case, the equipment operator may have to spend more time and effort working the material into the soil.

Organic matter and ash content: When using compost as an organic matter supplement, keep in mind that not all of the product is organic. In fact, some products contain less that 50% by weight of organic matter. Organic matter content can be determined by a lab test, but the most common procedure employed by laboratories considers everything that is combustible as organic matter (including wood chips, bark, leaves, and plastic). Hence, a lab test may not tell you everything about the quality of the organic matter. Although it is impossible to determine how much organic matter is present simply by looking at the product, a visual examination may tell you if the compost contains mostly decomposed, humus-like material or undecomposed organic matter, such as wood.

Some test labs report a value called 'ash content'. Ash is the mineral matter that remains after the compost sample has been subjected to extremely high temperatures in a furnace. Assuming that everything burned-off in the furnace is organic matter, the percentage of ash in the sample can be subtracted from 100 to provide an estimate Compost-fig2compost.jpg
Figure 2. Find a consistent product.

Figure 2. Try to find a product that is consistent from batch to batch and preferably one that has been used successfully by other turf managers.

Carbon to nitrogen ratio: The amount of carbon (C) relative to the amount of nitrogen (N) in a compost product is an important indicator of nitrogen availability. The carbon to nitrogen (C:N) ratio of a compost should fall below 30:1. If it's above 30:1, soil microorganisms can immobilize nitrogen making it unavailable to the turf. Fortunately, most commercial composts have C:N ratios below 30:1.

Nutrients: When compared with fertilizers, composts generally contain low amounts of nutrients. Whereas a small amount of quick-release nitrogen (ammonium) is present in some composts, most nitrogen is in the organic form and is slowly available to turf. Studies of composted biosolids show that only about 10% of the total nitrogen is available to plants during the first growing season. Little is known about the nitrogen release characteristics of other composts.

Other nutrients, such as phosphorus, potassium, calcium, and magnesium can be present in significant quantities in composts. Some composts, however, may contain very low concentrations of one or more of these nutrients, thus, fertilizer supplements may be required to provide all of the turf's nutrient needs.

Typically, large amounts of compost must be applied to supply all or most of the turf's nutrient requirements. This is difficult to achieve with surface applications since only a small amount of material can be applied in a single application. However, a 1 or 2 inch layer of compost tilled 4 to 6 inches into a soil can supply all of the nutrients necessary for turf growth and development for an entire year and possibly longer. The amounts of nutrients supplied by a compost depend on the source (animal manure composts are typically higher in plant nutrients than yard trimmings composts) and the availability of the nutrients. More research is needed to determine the availability of nutrients from different composts.

pH: The pH of most composts is between 6.0 and 8.0, a range favorable for turf root growth. A few composts, however, fall outside of this range. The pH of a compost may be detrimental to turf when very high (greater than 8.5) or very low (less than 5.5). Extremes in pH may result in reduced availability of some plant nutrients and/or toxicity problems. In a turf establishment study at Penn State seedling inhibition occurred following incorporation of a 2 inch layer of poultry manure compost (pH of 9.1) into a clay loam soil. It is likely that the high pH and presence of ammonium in the compost caused ammonia toxicity and subsequent death of the seedlings. Fortunately, most soils are buffered against rapid and drastic changes in pH and even composts with extremes in pH may not alter the overall soil pH a great deal. To be on the safe side, however, try using materials with a pH as near to neutral (7.0) as possible.

Metals: Composts made from biosolids often have higher metal concentrations than those made from other sources. State and federal government agencies have established maximum levels of metals in biosolids compost that are to be used for land application. Composts used for turf usually have to meet the same standards set for other crops. There are several biosolids composts that have been used successfully on turf in Pennsylvania that fall below the maximum allowable metal concentrations for land application.

Soluble salts: High concentrations of soluble salts may be present in certain types of compost, such as those made with spent mushroom substrates or animal manures. Excessive soluble salts can cause injury to turf by reducing water absorption, by toxicity, or by a combination of both of these factors. A common question among turf managers concerning soluble salts is: at what salt concentration will turf injury occur? The answer is that it depends on the type of salt, the salt tolerance of the turf, and the method of application.

Most soil laboratories can analyze composts for salt content. However, the salt concentration by itself may be somewhat misleading since the type of salt may be more important in determining the potential for plant injury. For example, salts containing sodium are more toxic to turfgrasses than potassium salts.

Turfgrass species and varieties vary in their tolerance to soluble salts. Salt sensitive grasses such as Kentucky bluegrass may be injured at concentrations of about 3 mmhos/cm in the germination and seedling stage (turfgrasses are particularly vulnerable in the early stages of growth). A moderately-tolerant grass, such as tall fescue, may not be injured unless the compost has a higher salt level (greater than 6 mmhos/cm).

The method of compost application may also influence the degree of salt injury. When composts are incorporated into soils, the salt concentrations are greatly diluted. Irrigation further diminishes salt concentrations by leaching them out of the root zone. In a recent establishment study at Penn State a spent mushroom substrate compost with a soluble salt content of 8.10 mmhos/cm was incorporated into a clay loam soil and irrigated daily until Kentucky bluegrass seeds germinated (approximately 20 days). Despite this high concentration, no noticeable seedling inhibition occurred, presumably due to the dilution effect of soil incorporation and leaching. It should be noted that the salts were primarily composed of potassium and calcium and that the results might have been different if high levels of sodium were present.
Surface applications of high-salt composts may cause injury to established grasses, especially during hot weather. Always irrigate to leach salts from the compost/soil mix immediately following surface applications to avoid the possibility of salt injury. Figure 3. Incorporate the compost into the soil.

Figure 3. Composts are typically applied to the soil surface at a 1- or 2-inch layer, then incorporated into the soil with rotary tilling equipment.
Guidelines summary

The preceding paragraphs serve only as a general guide. Some composts may meet these criteria, but could have other properties that make them unsuitable for turf use. Others may have properties that do not fall within these guidelines, yet are acceptable for use in some situations. When choosing a compost as a soil amendment prior to seeding or for surface application it is important that you are familiar with the product and how it will affect the turf. Try to find a product that is consistent from batch to batch and preferably one that has been thoroughly researched and/or used successfully by other turf managers.

If you are unfamiliar with the product, be sure to examine it for color, objectionable objects, particle sizes, and odors. It may be worth your while to visit the site where the compost is stored to make sure it is not contaminated with weeds or weed seeds. Other important considerations are moisture content, organic matter content, C:N ratio, nutrients, pH, metals, and soluble salts.

Table 1. Guidelines for Choosing a Compost

* Appearance, size, and odor
Color: Brown to black
Size (surface applications): 1/4 to 3/8 inch
Size (incorporated): 1/4 to 1/2
Odor: "Earthy"
Physical appearance
Moisture content: 30 to 50 percent
Organic matter: Greater than 30 percent
Ash content: Less than 70 percent
Chemical properties
Carbon : nitrogen ratio: Below or equal to 30:1
Nitrogen: 0.5 to 3.0 percent
Phosphorus: Greater than 0.2 percent
pH: 6.0 to 8.0
Metals: Determined by state and federal agencies
Soluble salts: Depends on turf species, type of salt, concentration, and application method. Consult test lab or other expert to determine how this will affect the turf.
*Use this information only as a general guide. Some composts have properties that do not fall within these guidelines yet are acceptable in certain situations. Others, though they may fit these criteria, may have serious drawbacks.

Methods of compost application

Soil incorporation prior to turf establishment: In most cases, composts are applied to the soil surface at a rate between a one inch layer (approximately 3.1 cubic yards per 1000 ft2) and a two inch layer (about 6.2 cubic yards per 1000 ft2) then incorporated into the soil to a depth of 4 to 6 inches. In order to obtain maximum performance from your application make sure that the compost is thoroughly mixed with the soil and is not forming a layer at the soil surface. Depending on the product, this may require several passes with rotary tilling equipment. The lower rate (1 inch layer) is better suited for marginally-good soils and the higher rate (2 inch layer) for very sandy soils, clay soils, or subsoils low in organic matter. We have found that if more than two inches are used, it may be difficult to mix the material 4 to 6 inches into the soil. On clay or compacted soils, it is helpful to rototill the soil first, then apply the compost and incorporate.

Figure 4. Modified spreaders with conveyer belts and brushes mounted on the back are ideal for surface applications of compost.

Figure 4. Modified spreaders with conveyer belts and brushes mounted on the back are ideal for surface applications of compost.

Surface applications on established turf: Composts are frequently used as surface applications (topdressings) on established turf. This practice provides a means of gradually incorporating organic matter into the soil without causing extensive disruption of the surface. The two most limiting factors associated with this practice are finding suitable application equipment and working the material into the soil.

Since compost is light and bulky, a spreader with a large hopper is preferred. Modified manure spreaders with conveyor belts and brushes mounted on the back are ideal for spreading compost over large areas. Conventional tractor-mounted fertilizer spreaders have been used successfully, but may require many refills. If spreaders are not available, compost can be applied to the surface by spreading piles into a thin layer with a York rake or a grading blade. For applications over small areas, the compost can be spread with a shovel and worked into the turf with a leaf rake.

When applying compost as a topdressing, it is important to apply a thin layer (about 1/4 inch) and work it into the soil. Successive applications of thick layers without soil incorporation will result in a build-up of organic matter at the soil surface that may cause rapid drying of turf roots and form a layer that restricts rooting into the soil. The best way to incorporate compost into the soil is through aeration. A good method of incorporation is to apply the compost first, followed by several passes with an aerator equipped with hollow-tines and a heavy drag mat attached. The drag mat will break-up the cores and mix the compost with the soil, dragging some of the mix back into the holes. This operation is best performed during cool/moist seasons when grass is actively growing. Aeration and dragging can be stressful to the turf during hot, dry weather.

Table 2. Suggested amounts of compost (cubic yards) per unit area applied to established turf as surface applications or tilled into soil prior to establishment.

Inches of compost applied

Surface application

Tilled into soil

Unit area in square feet 1/4 1/2 1 1 1/2 2
1,000 1* 2 3 5 6
5,000 4 8 15 23 31
10,000 8 15 31 46 62
20,000 15 31 62 93 123
30,000 23 43 93 139 185
40,000 31 62 123 185 247
*amounts of compost in cubic yards rounded to nearest whole numbers.

Prepared by Peter Landschoot, associate professor of turfgrass science.

Penn State College of Agricultural Sciences research, extension, and resident education programs are funded in part by Pennsylvania counties, the Commonwealth of Pennsylvania, and the U.S. Department of Agriculture.

This publication is available from the Publications Distribution Center, the Pennsylvania State University, 112 Agricultural Administration Building, University Park, PA 16802. For information telephone (814) 865-6713.

Where trade names are used, no discrimination is intended and no endorsement by the Pennsylvania State University Cooperative Extension is implied.

Issued in furtherance of Cooperative Extension Work, Acts of Congress May 8 and June 30, 1914, in cooperation with the U.S. Department of Agriculture and the Pennsylvania Legislature. T. R. Alter, Director of Cooperative Extension, The Pennsylvania State University.

The Pennsylvania State University is committed to the policy that all persons shall have equal access to programs, facilities, admission, and employment without regard to personal characteristics not related to ability, performance, or qualifications as determined by University policy or by state or federal authorities. The Pennsylvania State University does not discriminate against any person because of age, ancestry, color, disability or handicap, national origin, race, religious creed, sex, sexual orientation, or veteran status. Direct all inquiries the nondiscrimination policy to the Affirmative Action Director, The Pennsylvania State University, 201 Willard Building, University Park, PA 16802-2801; Tel. (814) 865-47700/V; (814) 863-1150/TTY.

Article Tags:
Best of the rest