









EverEdge Classic - 5m Pack
SKU: 188962
Brand: Everedge
Want it tomorrow?
Order within 5 Hrs 15 Mins
Select ‘Next Working Day Delivery’ in Checkout
Advisories
- As EverEdge overlaps and interlocks, please remember to add 6% to your actual requirement - that is 6 cm per metre of EverEdge you use.
- CorTen steel and Galvanised steel can have sharp edges and extra care must be taken when installing these products in properties with children or pets. If you would like advice on whether these finishes are suitable for your garden please call us on 01902 440250.
Our Lawn Edging Iron is available to assist with the installation of EverEdge.
EverEdge Installation Examples Gallery
EverEdge is easy to install and requires no further maintenance.
Once a neat earth edge has been established, the only tools required to install EverEdge are a heavy hammer, a screwdriver, and a block of wood. EverEdge is engineered from 1.6mm gauge galvanised mild steel, coated with corrosion-resistant paint finish. This means that once it's installed, it's maintenance-free. The depth stated does not incorporate the spikes.
Please note that for most applications, lawn to path or lawn to flowerbed, the 1.6 mm is the preferred product to use, however if there is a possibility of vehicle traffic then the Heavy Duty or ProEdge (2.5 mm) is preferable, please contact a member of our technical sales team for more information.
Dimensions:
- Length - 1 metre lengths that come in a pack 5 x 1m strips
- Heights - 75mm (3"), 100mm (4") and 125mm (5")
- Thickness - 1.6mm (Classic)
- Spike length - 94mm
EverEdge Installation Instructions & Video
- It is important to form either a new edge or to re-cut your existing edge. This can be straight or curved.
- Place EverEdge where required. Take a block of wood and place on top of the EverEdge and hammer in to the ground to approximately 15mm below your cut grass level. Curve or bend EverEdge as required.
- Link the EverEdge by locking on to the previous piece. There is also a tongue below the locking piece which should be pushed through the hole with a screwdriver.
EverEdge Basic Installation Guidelines
To anchor EverEdge securely in poor ground conditions, use the EverEdge Pin & Sleeve System.
For further information on EverEdge Classic - 5m Pack, please speak to a member of our technical sales team on 01902 440250.
FAQs
Which EverEdge Classic height and finish can I choose?
This listing offers 75mm, 100mm and 125mm profile heights in Brown, Slate, Green and Black. The stated profile height excludes the ground-fixing spikes.
How much extra Classic edging should I allow for joints?
The strips overlap and interlock. Pitchcare recommends adding 6% to the measured run when calculating quantities, then rounding up to complete packs.
Can painted EverEdge Classic follow a curved border?
Yes. The flexible 1.6mm galvanised-steel strips can be formed into curves or used along straight edges. They join together to separate lawns, paths and planted beds.
What tools are needed to fit EverEdge Classic?
Prepare a defined earth edge, then use a hammer or mallet with a timber block to drive the edging in. A screwdriver operates the joining tab between strips.
Is Classic 1.6mm edging the best choice beside vehicle traffic?
The Classic profile is primarily intended for lawn-to-path and lawn-to-border use. Where vehicle loading is possible, a heavier-duty edging specification is more appropriate than choosing Classic on appearance alone.
Delivery & Returns
Delivery charge (if applicable) applied at checkout. Next working day delivery is available on some products, as an option on orders placed before 1pm - excludes festive season & bank holidays. Please note deliveries to Highlands, Cornwall and more remote areas may take longer. Surcharges apply for non mainland locations, call for more information - More delivery information.
We require deliveries to be signed for. If no one is available to sign for your delivery, you may request it is left in a safe place by leaving a signed note for the driver, requesting the item is left without a signature. Please note that this is left at your own risk and at the driver's discretion.
For large orders, please be aware that if you require a smaller 7.5 tonne lorry, the maximum weight for pallets is 750 kg - otherwise the standard pallet size limit of 1000 kg applies.
Please note:
- For deliveries that require a pallet, the pallet/packaging itself is the customer's responsibility and will not be uplifted or taken upon delivery.
- Deliveries are kerb side only.
- It is possible a pallet order can be delivered on a vehicle up to the size of a 26T lorry.
If you have any access restrictions for lorries or large vehicles please speak to our sales team on 01902 440250.
Collection from our Telford, Shropshire, Trade Counter is available for this product - More collections information.

















