New Billy Goat Truck Loaders go to the top of their class.

Lance Bassettin Industry News
DL_02.jpg Pinnacle Power Equipment, UK distributors of the market leading Billy Goat Vacs and blowers, has introduced a new range of Billy Goat DL series truck
loaders that shred and move more debris than any truck loader in its class.

The new DL series has been designed for ease of use and to give a higher reduction and compaction rate and with improved suction.
One of the models introduced is the DL2500S powered by a 25hp Robin Subaru electric start engine driving a 6-bladed armoured steel impeller with 18
cutting points for the ultimate in debris reduction giving a reduction ratio of up to 12:1, the best reduction of any equally powered loader!

A redesigned impeller has a width which is 2in (5cm) wider than previous and 6 inches (15cm) deeper. This all gives an airflow surface area of 227 square
inches (1465 sq cm), again, the biggest in its class. The most surface area for moving the most debris.

Manufactured from clear Urethane, the 10 ft x 12 in (300cm x 30cm) intake hose and the discharge hoses are smoother, lighter and of course
see-through so the operator can see just what's going on and with a discharge adjustment by a hand crank, no truck loader is easier to adjust-plus with a
100% increase in the size of the fuel tank it also means less downtime with refuelling.

The other DL model launched is the DL1800V. This loader has an 18hp Briggs & Stratton Vanguard engine, now fitted with the convenience of electric
Starting and a six-blade fan offering significant noise reduction and again the impeller features the new 18 cutting point system that comes with the
larger DL2500S loader.

Also standard on the DL1800V are the clear intake and discharge hoses along with the large fuel tank and intake hose storage.

with beefier tyres and mudguards on the trailer, the new DL Series Truck Loader from Billy Goat are bound to get things moving this autumn.

For further details call 01932 788799 or visit www.pinnaclepower.co.uk
Article Tags:
Industry news