Key Tasks for September
It is important that you carefully evaluate the needs of your courts; the work required will be determined by the condition of the courts with regard to wear (bare areas), weed infestation, levels of thatch content, nutrient status and overall surface levels.
A soil analysis will determine a number of factors to help you decide on the appropriate treatments and choice of materials required for your end of season renovations.
By taking a soil sample, you can also identify the amount of thatch present. This will help you decide on the level of scarification required. One of the biggest problems during renovations is the fact that many clubs do not remove enough thatch from their swards. This is often due to either not enough passes with the scarifier at the correct depths, or using a machine that is not robust enough or engineered to cope with the work required.
Other important tasks:
- Ensure all materials (seed, fertilisers, topdressings) and any hired machinery have arrived, and are secured and stored safely on site ready for use. Often, when ordering materials late, you may be faced with delays on delivery or not being able to get the products you want in time for your planned works.
- Continue with weekly or twice weekly mowing regimes to maintain sward height.
- Maintain turf vigour and colour with an application of an autumn fertiliser.
- Once the playing season is over, take down nets and posts and store away, replacing any broken or damaged equipment.
- Get organised for your end of season renovations, ensure you have ordered your materials to arrive on time. Check equipment, ensuring it is ready for the work entailed. Check all belts and drives on the scarifiers.
- If you are intending to use a contractor to do your work, confirm start dates and be clear they understand what level of work you want.
- Arrange to have your mowers serviced during the winter months.
Renovations
Depending on the severity of the thatch, you may need to scarify several times in different directions. However, in most cases, if regular verticutting/grooming has taken place during the growing season, you would probably only be required to scarify in two directions. Do not scarify at right angles to the previous scarification line. Depth of scarification between 4-15mm depending on depth of thatch to remove.
In recent years, we have seen a number of clubs fraise mowing the courts to remove surface vegetation. This method is more thorough and helps restore levels, however it comes at a higher cost than traditional scarifying methods.
Blowers / vacuums / power brushes and mowers can be used to clean up the courts after scarifying has been completed.
Aeration. Aerate to relieve compaction and encourage root development. Aeration is the decompaction of soil, improving air and gas exchange in the soil profile. Depending on the turf's condition, you can choose to carry out hollow or solid tine spiking.
Hollow tines are generally used on a bi-annual basis or when you have a severe thatch problem. Depth of aeration will be determined by the depth of your soil profile and what problems you want to rectify. Hollow tining is best achieved to a depth of between 75-100mm. Solid or slit tines can be set to penetrate deeper, ideally between 100-200mm.
Topdressing restores levels and improves surface drainage. Ensure you use compatible topdressing materials, sands, sand/soil mixes. Spreading can be achieved by several methods, utilising pedestrian or ride on disc or drop action top spreaders, or by hand using a shovel and a barrow. Best carried out in dry weather. It is important that the topdressings are spread uniformly.
Overseeding restores grass populations. It is important to ensure a good groove or hole is made to receive the seed; good seed to soil contact is essential for germination. Good moisture and soil temperatures will see the seed germinate between 7-14 days. Invest in good seed varieties, do not compromise the hard work by buying cheap grass seed, have a look at the current Turf Grass Seed Guide and see what varieties are recommended for Tennis.
Fertilising provides nutrients for grass growth. Apply a low N nitrogen fertiliser product something like an NPK 5:5:15 to help the sward through the autumn period.
Brush to incorporate dressings and to help the grass stand back up. Brush in with a lute or drag brush/mat to restore levels.
It is essential to keep the sward watered after renovations to ensure your seed germinates.
Other Surfaces
Many artificial, sand filled courts are not cleaned regularly, mainly due to the fact that they were sold, mistakenly, as maintenance free facilities. However, these courts require regular brushing and cleaning to keep the pile upright and prevent contamination of the sand infill materials.
Artifcial courts. Spend time cleaning and maintaining your artificial playing surfaces, they are not maintenance free and require appropiate attention to keep them clean, safe and playable. We now have a lot of different playing surfaces to manage, so consult manufacturer's guidelines and regularly inpect and maintain these surfaces.
Inspect fencelines, net posts and netting. Also check floodlighting; you should have the lights inspected and certified for use annually.
Keep surfaces clean with regular sweeping and brushing. Remove any algae and moss from surface. Sand filled systems require regular brushing to maintain manufacturer's recommendations on sand levels and pile heights..
American Fast Dry courts. Keep surface clean, rolling to consolidate surface, levelling and brushing of fast dry materials, brushing to clean lines.
Clay courts. Keep surface clean, regular sweeping and brushing to restore playing levels using SISIS Trulute or similar equipment. Topdress any hollows or damaged areas. Repaint lines.
Tarmacadam. Keep surfaces clean, regular sweeping and brushing. Repair any hollows or damaged areas. Repaint lines.
After a long hot and dry summer, the end of August has proved to be somewhat text book in many areas of the country, with cooler temperatures, periods of rainfall and less intense sunshine all combining to increase soil moisture and instigate grass plant growth. Whilst this may seem like a return to normal, maximising recovery from a position behind where we would normally expect to be at this time of the year requires consideration and thought if surface quality is to be maximised ahead of oncoming reduced growth over the autumn and winter. A situation made all the more challenging due to the impact of recent legislative changes in the plant Protection Product market.
It is then, not an over exaggeration to state that September 2018, more than any other September in recent memory, is the month which will define the turf management year, with the three R’s of recovery, renovation and repair.
Soil Water Management
With increasing rainfall levels in many areas of the country, moisture is returning to the soil. However, aiding the penetration of that water away from the surface and into the soil profile via the combination of aeration and wetting agents with a high percentage of penetrant activity. This enables the perennial grasses, with their deeper root systems, to access water in good time and helps to stem the encroachment of emerging algae and moss, along with germinating weeds and Poa annua seeds closer to and at the surface. This is particularly important on surfaces which contain a greater percentage of thatch than is desirable, as these will be the most hydrophobic surfaces, actively repelling water absorption.
Nutrition
Once soil moisture levels have returned to optimum, then granular fertilisers will provide the optimum means of introducing nutrition into the profile by which to induce recovery. Try to avoid feeds which are heavy on ammonium as the nitrogen source, as this will produce a flush of growth which is then susceptible to fungal disease. Rather lower ammonium values, accompanied by urea and methylene urea, will provide a steady feed and consistent controllable growth.
Be aware that in optimum moisture and temperature conditions, granular fertilisers (which are made available to the roots via the soil water solution) will in the case of ammonium take between 5-7 days to induce a noticeable response in the plant, with urea coming online after 10-14 days. Methylene will then slowly become available over a period as long as 10-12 weeks dependent upon the ratio of short, medium and long chain molecules in the product.
Weeds
Due to the traditional June spraying window being unsuitable for the application of herbicides, many areas will have gone untreated. Turf weeds such as Taraxacum officinale (common dandelion) are adapted to persist longer in a surface during drought conditions, in the case of this plant due to the deep tap root. Additionally, weed seeds on the surface of thin swards will germinate with the moisture provided by rainfall.
Consequently, September provides the last opportunity of 2018 for controlling weeds at a time when strong growing conditions persist, thus aiding the uptake, translocation and efficacy of selective herbicides. Undertaking this operation now will prevent weeds taking a firm foothold into next spring.
Pests
Now is the time to apply nematodes to areas for the control of leatherjackets and chafer grubs. This time of year represents the period when young juvenile larvae are hatching out and moving through the soil surface. Consequently, this is the time nature intended for the nematodes to predate upon the small juvenile grubs. Soil water levels need to be good before and for two weeks after application to allow the nematodes to swim to their prey and be effective. Facilitating their passage into the soil with a penetrant wetting agent is a useful strategy, as is sarel tine aeration immediately prior to application.
The newly approved chemical control Acelepryn is on an Emergency Authorisation which expires on the 20th September 2018. Releases of stock are dictated by strict Stewardship conditions which require each situation to have been assessed and authorised by a BASIS qualified advisor. The only authorised application areas are; airfields, race courses, golf greens and golf tees.
September heralds the arrival of worm season. There are no authorised chemical controls for worms. The only acceptable means of managing the issue are cultural ones such as brushing casts when dry or temporarily amending the surface pH via the application of substances such as sulphur. At a time of change which places new demands on turf managers to produce results and maintain standards, a raft of control options can become available, often these options are not labelled for the control of a particular issue however any substance applied with the intention of directly effecting, harming or deterring a pest is done so as a pesticide, and consequently is being done illegally if it is not registered with a MAPP number (Ministry Approved Pesticide Product) by the Chemicals Regulation Division.
Users should also consider the associated risks to the wider environment and ecosystem of any product which has not been subjected to the rigorous, scientific, independent testing standards.
Disease
Once moisture returns so does relative humidity; when humidity combines with stressed turf and warm temperatures, conditions are conducive to the growth of fungi. Consequently, a host of turf diseases can expect to be witnessed through into September.
However, 2018 is the first year without the curative activity of the fungicide iprodione, the active ingredient in Chipco and Interface. The only chemical options for turf disease are preventative systemic substances. Application prior to the observation of symptoms is vital in ensuring their success.
It is worth consulting the Turf Disease Triangle below and giving due consideration to what circumstances, conditions, maintenance practices and inputs on your site may influence each of the three factors.
Away from Plant Protection Products, such as fungicides, which directly target a virulent pathogen, thriving in a favourable environment, one of the most effective tactics available to the turf manager is to reduce the susceptibility of the host. In this regard, adequate water availability combined with appropriate and balanced base nutrition are further bolstered by the benefits of cell wall boosting and plant system enhancing calcium, phosphite and silicon.
You should have had your mower serviced and sharpened ready for the new season.
- Inspect machinery and equipment
- Clean after use
- Remember to check air filters
- Inspect and reset mowing blades on cylinder mowers to ensure they remain sharp
Some of the courses available are:
- Chainsaws - CS30 and CS31
- H&S Refresher Training on Combined Turf Care Equipment; Tractors and Trailers; All Mowers (Ride-on and Pedestrian)
- Machinery Courses on ATVs; Tractors: Brushcutters/Strimmers; Mowers (ride-on and Pedestrian)
- Pesticide Application (PA courses)
- Stem Injection of Invasive Species (Japanese Knotweed etc.)
- Basic Trees Survey and Inspection
More details about all the courses can be found on our new Grounds Training website, or you can email Carol Smith for information.
- Ensure drainage outfalls, channels and ditches are clear
- Inspect stored posts, nets, seating and notice/score boards
- Inspect and remove debris from playing surface
- Regular sweeping and brushing
- Repair any hollows or damaged areas
- Repaint lines