







EverEdge Classic CorTen - 5m Pack
EverEdge Classic CorTen is a metal lawn edging which has been designed to keep lawns, paths, driveways, flower beds or other landscaped areas, neat and immaculate.
Please Note: As EverEdge overlaps and interlocks, please remember to add 6% to your actual requirement - that is 6 cm per metre of EverEdge you use.
SKU: 209675
Brand: Everedge
Want it tomorrow?
Order within 5 Hrs 19 Mins
Select ‘Next Working Day Delivery’ in Checkout
EverEdge is the permanent solution to the age-old problem of maintaining neat edges for lawns, path edging, flower and vegetable beds, and can be used in a variety of soil conditions.
EverEdge CorTen is supplied as untreated weathering steel. It normally arrives with a non-rusty blue-steel appearance and develops a rust-coloured surface patina outdoors, typically over three to six months depending on weather and location.
Advisories
- CorTen develops a protective surface patina. Avoid exposure to salt and patio or masonry cleaners containing acids or chlorine, which can damage the patina and accelerate corrosion.
- CorTen steel and Galvanised steel can have sharp edges and extra care must be taken when installing these products in properties with children or pets. If you would like advice on whether these finishes are suitable for your garden please call us on 01902 440250.
Our Lawn Edging Iron is available to assist with the installation of EverEdge.
EverEdge CorTen Installation Examples
Dimensions
- Length - 1 metre lengths that come in a pack 5 x 1m strips
- Heights - 100mm, 125mm and 150mm; excludes spikes
- Thickness - 1.6mm
- Spike length - 94mm
Installing EverEdge CorTen
Once a neat earth edge has been created, install EverEdge CorTen using a hammer or mallet, a screwdriver and a block of wood. CorTen is untreated weathering steel, rather than galvanised steel with a black painted finish.
To anchor EverEdge securely in poor ground conditions, use the Pin & Sleeve System.
Installation
- It is important to form either a new edge or to re-cut your existing edge. This can be straight or curved.
- Place EverEdge where required. Take a block of wood and place on top of the EverEdge and hammer in to the ground to approximately 15mm below your cut grass level. Curve or bend EverEdge as required.
- Link EverEdge by locking on to the previous piece. There is also a tongue below the locking piece which should be pushed through the hole with a screwdriver.

For further information on EverEdge Classic CorTen - 5m Pack, please speak to a member of our technical sales team on 01902 440250.
FAQs
Is EverEdge CorTen painted to look rusty?
No. It is untreated weathering steel that develops its own surface patina. It is a different finish from galvanised and painted EverEdge Classic.
Will CorTen edging arrive with its final rust colour?
It normally arrives as non-rusty blue steel and weathers after exposure. EverEdge indicates that the characteristic patina commonly develops over three to six months, depending on the site and weather.
What CorTen heights are available from Pitchcare?
The listed choices are 100mm, 125mm and 150mm, measured above the fixing spikes. Each pack contains five nominal one-metre strips that overlap when joined.
Can patio cleaners affect the CorTen finish?
Yes. EverEdge advises avoiding salt and cleaners containing acids or chlorine, which can damage the patina and accelerate corrosion. Keep those treatments away from the edging.
Delivery & Returns
Delivery charge (if applicable) applied at checkout. Next working day delivery is available on some products, as an option on orders placed before 1pm - excludes festive season & bank holidays. Please note deliveries to Highlands, Cornwall and more remote areas may take longer. Surcharges apply for non mainland locations, call for more information - More delivery information.
We require deliveries to be signed for. If no one is available to sign for your delivery, you may request it is left in a safe place by leaving a signed note for the driver, requesting the item is left without a signature. Please note that this is left at your own risk and at the driver's discretion.
For large orders, please be aware that if you require a smaller 7.5 tonne lorry, the maximum weight for pallets is 750 kg - otherwise the standard pallet size limit of 1000 kg applies.
Please note:
- For deliveries that require a pallet, the pallet/packaging itself is the customer's responsibility and will not be uplifted or taken upon delivery.
- Deliveries are kerb side only.
- It is possible a pallet order can be delivered on a vehicle up to the size of a 26T lorry.
If you have any access restrictions for lorries or large vehicles please speak to our sales team on 01902 440250.
Collection from our Telford, Shropshire, Trade Counter is available for this product - More collections information.
















