Description
Spot On Pro Weed & Moss Killer
| Product Overview | |
|---|---|
| Product Type | Herbicide |
| Product Name | Spot On Pro Weed & Moss Killer |
| MAPP No. | 20184 |
| Active Substances | Acetic acid |
| Formulation | Soluble concentrate |
| Areas of Use | Hard surfaces, Natural surfaces not intended to bear vegetation, permeable surfaces overlying soil |
| Amateur/Professional | Professional |
| Phytomobility | Contact |
| Mode of Action Group | Physical action |
Spot On Pro Weed & Moss Killer is a glyphosate-free herbicide containing acetic acid. Also known as vinegar, acetic acid causes plant cell membranes to break down resulting in a rapid burn down effect after application. Spot On Pro Weed & Moss Killer contains a much higher concentration of vinegar compared with household vinegar (24% compared with 5%) as well as a surfactant to improve application efficacy. It controls above ground growth quickly and effectively.
When used on small weeds within 2 weeks of germination, complete control can be expected within 24 hours. On established perennial weeds and grasses repeat applications may be required. Spot On Pro Weed & Moss Killer also offers excellent control of mosses, particularly on hard surfaces. It is ideal for control of weeds and mosses on any surface where plant growth is not required such as paths, patios and hard standing areas. It is particularly useful for rotation with other herbicides to reduce the likelihood of resistance and for use in areas where glyphosate applications are being reduced.
Product Benefits
- Can be used all year round
- Approved for use on hard surfaces
- Fast acting
- Controls broad leaved weeds, grasses AND moss
Instructions for Use
Where to use:
Spot On Pro Weed & Moss Killer can be used on hard and permeable surfaces in areas such as paths, roads, playgrounds, parks and tennis courts, churchyards, industrial sites, fence lines and similar:
- Hard surfaces: Any artificial impermeable surface, such as concrete or asphalt that is not intended to bear vegetation
- Natural surfaces not intended to bear vegetation: Areas of soil or natural outcroppings of rock that are not intended to bear vegetation
- Permeable surfaces overlying soil: Any artificial permeable surface such as gravel that overlies soil and is not intended to bear vegetation
When to use:
Spot On Pro Weed & Moss Killer can be used all year round, whenever weeds or mosses are visibly present on hard, permeable or natural surfaces.
How to use:
Spot On Pro Weed & Moss Killer should be applied using handheld application equipment such as a knapsack sprayer using a nozzle with a coarse spray quality . Because Spot On Pro Weed & Moss Killer is a contact acting herbicide it is important that leaves and stems are fully wetted to ensure a good level of control. Small weeds within 2 weeks of germination should be fully controlled within 24 hours of application. However, established perennial weeds may require repeat applications. For good control of mosses, ensure the surface is dry, repeat applications may be required if moss growth is thick.
| Application Rate | Water Rate | Pack Size | Pack Coverage |
|---|---|---|---|
| 25ml/m² | 75ml/m² | 5L | 200m² |
- Before spraying ensure that the spraying equipment has been thoroughly cleaned
- Half fill the spray tank with clean water
- Add the required quantity of Spot On Pro Weed & Moss Killer through the filter
- Top up with the remaining water and agitate to ensure thorough mixing
- If required, repeat treatment after a period of seven days or more
Additional Information
- Spot On Pro Weed & Moss Killer can be safely used close to or around trees, shrubs and other plants as long as the spray is not allowed to come into contact with the plant.
- A minimum interval of 7 days must be observed between applications
- Applications must not be made via tractor mounted horizontal boom sprayers
- Direct spray from applications using hand held sprayers must not be allowed be allowed to fall within 1 m of the top of the bank of any water body
- Avoid contact with non-target plants
Active Substances
Acetic Acid
Bio-Chemical Mode of Action: Acetic acid has a physical mode of action in which the plant cell membranes are destroyed, leading to the desiccation of the plant.
Mobility: Acetic acid is a contact acting herbicide which means that it will not move into the plant and will only affect the parts of the plant that it directly contacts on application.
Application timing: Because acetic acid is contact acting, it does not require active plant growth to translocate and can therefore be applied at any time of the year.
Resistance: There is no reported resistance to acetic acid.
For further information on Spot On Pro Weed & Moss Killer, please speak to a member of our technical sales team on 01902 440280.
Technical Information
Safety Data Sheet
SKU - 219696
Delivery and Returns
Delivery charge (if applicable) applied at checkout. Next working day delivery is available on some products, as an option on orders placed before 1pm - excludes festive season & bank holidays. Please note deliveries to Highlands, Cornwall and more remote areas may take longer. Surcharges apply for non mainland locations, call for more information - More delivery information.
For large orders, please be aware that if you require a smaller 7.5 tonne lorry, the maximum weight for pallets is 750 kg - otherwise the standard pallet size limit of 1000 kg applies.
If you have any access restrictions for lorries or large vehicles please speak to our sales team on +44 (0)1902 440250.
Collection from our Telford, Shropshire, Trade Counter is available for this product - More collections information.