Attraxor® - Plant Growth Regulator 1.5kg

Attraxor^®

Active Ingredients: 100 g/kg prohexadione.

MAPP no. 18939

Attraxor^® has been shown to effectively regulate growth of managed amenity turf. The active substance inhibits the giberrelic acid pathway which results in a reduction of turf height and turf biomass. Root growth is promoted through the use of Attraxor^® whilst turf colour and quality are maintained.

Prohexadione, the active substance in Attraxor^® is activated in the tank by the addition of water; therefore growth regulation occurs rapidly following application of the product.

Key Advantages

Instructions for Use

Where to use: For use on managed amenity turf.

When to use:

• Apply when grass is growing consistently and air temperatures are between 7°C — 21°C.
• Initial application can be made once there have been 450 growth degree days in the year based on the zero GDD model.
• Subsequent applications can be made every 21 days from this point.

I was amazed by how fast Attraxor^® claimed to get into the plant. We measured our clip rate before using Attraxor and it was 25.9 ml/m². The day after we had applied the product the clippings had reduced to 17.7 ml/m²., an almost 32% reduction.

Jamie Blake

Head Greenkeeper
Broadway Golf Club

We use an Attraxor^® programme all season across our natural grass pitches, both at the training ground and stadium. From this we see a 50% reduction in mowing frequency and clipping volumes, which provides considerable time and cost savings.

Bundesliga

UEFA Champions League

How to use*:

• Add 3/4 of the required water to the spray tank.
• Before adding any other products; remove top hat filter and pour Attraxor^® directly into the tank whilst agitating the water.
• Agitate well to ensure Attraxor^® is fully dissolved then add remaining water through top hat filter.
• Apply one hour after mowing in slow drying conditions.

Additional information:

• Use the lowest stated water volumes when mixing with hard water.
• Ideal pH of spray solution is 4.5 - 5.5.
• Add Attraxor into the spray water before any other products
• Having removed the top hat filter, add Attraxor directly into t a spray tank containing 3/4 of the final spray volume and agitate until dissolved
• Attraxor should be applied alongside 2.5 kg/ha supplementary nitrogen.
• Do not mix with fertilisers containing calcium, magnesium or boron.
• Replace lid immediately as Attraxor^® granules will rapidly absorb water from the atmosphere.
• Do not apply when turf is stressed or in direct sunshine.
• Do not irrigate for at least four hours post application.

* Application rates for Attraxor^® are dependent on turf height and presence/absence of Poa annua. See tables below for more detailed application rate information.