Rotary spreader consistent spread pattern from 2 to 6 metres wide
Allows exact setting of application rate
Can also be used for grass seed and sand
Large wheels for easier pushing and no tread marks
Galvanised steel
Hopper capacity 25kg
Features
Stand
Start/Stop Lever
Gear Box Control
Impeller
Operation Instructions:
Pull the main shut off lever to the closed position before filling the hopper
Start rolling the spreader forward before opening the ports; close the ports before stopping
Hold the handle so that the hopper is level. Tipping the spreader too far forward or backward will cause uneven spreading.
Use the swath width recommended on the bag for your spreader at 3mph (a brisk walking pace) Apply material in forward direction. Do not pull.
The settings given on the product label are recommended starting points
The start/stop lever is sued to block off the right side portion of the swath width. It should be used in the "on" position together with the auxiliary shutoff in the closed position.
A hopper cover is provided with your new spreader. Use it to protect turf product inside the hopper from light rain or windy conditions during transportation.